RG200-2 high pressure and high srength fly ash brick machine
RG200-2 baking -free brick machine
Mechanical force pressure
200t(mechanical vibration,double-sided press)
305×155×45 240x240x90 240x190x190 240x115x90 240x115x53
(If you need other sizes,please contact us for more details)
Feeding depth (mm)
Overall dimension (mm)
Ⅱ.Extraordinary features of RG200-2 made by Ruiguang:
1. RG200-2 brick making machine is a new type of high pressure
Non-burnt machine,it can produce bricks with low cost,
high-intensity and high-quality.
2.mechanical vibration,double-sided press,good quality, non-sticky
mold or non-stop mold .
3. Airtight drive motor, easy operation, easy maintenance.
4. Mainly produce solid standard brick, by changing mold, it can
also make blind hole bricks,perforated bricks and etc.
5.This machine was added vibration pressure exhaust structure ,
forced feeding structure, have advantages of small power, high
forming pressure, enough and even feeding, high density etc.
6.No need pallets, palletizing directly; Highly automation,low
investment, easy installation, low failure rate, high capacity,
small footprint, short construction period, less production
personnel, fast return on investment, high economic efficiency.
1, crushing: the raw material to be grinded by grinding mill.
2,.Screening: The particle size should be (0-3) mm after crushing.
3.Mixing: Blending the crushed materials evenly.
4.Rolling: stirring raw materials delivered to the rolling mill,
grind the materials evenly.
5.Moulding: Convey the materials into brick press machine and can
be pressed into a brick.
6.Curing: stack the bricks and cure the bricks with water after 24
hours, three times a day in spring and five times a day in summer,
after 21 days bricks can be applied for final use.
1,Fly ash, slag, rock flour, river sand, mineral waste,coal gangue,
weathered granite, construction & industrial waste and etc.
2,Red soils,clay,sand oil which contains 60%-70% sand.(Add small
amount cement,lime and chemical additives.)
Minimum strength of single piece
Frost resistance: after 15 freeze-thaw cycles, the strength and
appearance maintain the same properties, dry weight loss 0.22kg.
S350D Grinding wheel mixer
Single roller pressure
Main shaft speed
Main shaft speed
1.Always keep the machine clean, Clear the waste, greasy dirt on
the machine, and scrub the outer surface .
2. Check and adjust the gap of various parts of the machine, to
ensure the normal production .
3 .The various parts should do rust protection if the machine needs
long-term storage, and check the condition every three months, use
gasoline clean and re-oil the machine before reusing it.
4.Easily wearing parts should be replaced when affect the normal
work of the brick machine .
5. Small check and repair every 6 months and big check and repair
every 12 month for the machine should be taken after the machine go
Directly contact us for details!